Electric Pressure Test Pump 150W–350W 25–100 Bar Clean Water Pipeline Testing Pump 220V

If your pipes can't pass this test, they can't handle the job.
Leaks don't announce themselves. They hide in joints, fittings, and welds — until the system is under pressure and something goes wrong. This electric pressure test pump is how you find them before they become a problem. Plug in, pressurise, and watch the gauge. Everything the pipe can't handle shows up immediately.
Used in irrigation systems, mining pipelines, plumbing installations, agricultural water lines, and industrial pressure testing — wherever clean water systems need to be verified before they go live.
Choose the pressure range your job actually needs.
Available in three configurations: 0–25 kg/cm², 0–60 kg/cm², and 0–100 kg/cm². Each model runs on 220V at 1440 RPM with a flow rate of 180L/H. Whether you're testing a residential water line or a high-pressure industrial pipeline, there's a model rated for exactly that range — and nothing excessive that adds cost you don't need.
The pump head won't rust. Even after years of water contact.
The anti-rust pump head is made from a high-hardness material that resists corrosion through repeated use with clean water. On a pump that exists specifically to push water through pipes under pressure, a rust-resistant head isn't a premium feature — it's the baseline requirement. This one meets it.
Read your pressure accurately. Even when the pump is vibrating.
The shockproof pressure gauge holds a stable, clear reading throughout the entire test cycle. No needle bounce. No waiting for the display to settle. You see exactly what pressure the system is holding at every moment — which is the only way a pressure test actually means anything.
The filter protects your pump. And your pipes.
The water pipe strainer blocks dirt and debris before it enters the pump or the test system. Clean water in means accurate results out — and a pump that doesn't wear prematurely from particulate damage. For field use where water source quality varies, this filter is what keeps the pump reliable, test after test.
The switch tells you exactly what state it's in.
ON indicator light glowing — motor running, pump working. OFF — motor stopped. No guessing, no checking twice. The visual indicator gives you immediate confirmation of operating status, which matters when you're managing a pressure test and need to know at a glance whether the system is live.
Everything you need is in the box.
High-pressure pipe, large water tank, transparent hose, large-diameter water pipe and strainer, spare seal — all included. The only thing you'll need to source separately is thread adapters if your specific pipe fitting requires a different size (4-point to 6-point or 4-point to 1-point fill cores are available locally).
The copper-wound motor runs cool, runs stable, runs long.
The motor uses a copper wire winding process — not aluminium substitute windings — for better conductivity, lower heat generation, and longer service life under sustained 220V operation. It's the kind of internal specification that doesn't show up in photos but shows up in how long the pump lasts.
Power: 150W / 250W / 350W | Voltage: 220V 50Hz | Pressure Range: 0–25 / 0–60 / 0–100 kg/cm² | Flow: 180L/H | Speed: 1440 RPM | Current: 3.0A | Drive: Electric