5T–30T Hydraulic Gear Puller 2/3 Jaw Interchangeable Bearing Removal Tool

The pump body is forged from raw material. One piece. No joints.
The pump body is integrally formed through forging from solid raw material — not assembled from multiple components, not welded together. There are no internal joints to crack under pressure, no seams to leak along, no weak points where repeated high-force cycles can cause fatigue failure. The structural integrity of the pump body is uniform throughout. That's what integral forging delivers that fabricated bodies cannot.

The thimble is thickened. The plunger is thickened. Both matter.
Wear on the thimble and plunger is where most pullers start to fail after heavy use. The YLX series addresses this with reinforced thimble geometry and a thickened plunger design, increasing the contact area and wall thickness at the points that take the most stress during extraction. The result is measurably longer service life compared to standard-wall designs — particularly in high-cycle applications where the puller is used repeatedly throughout a working day.

The claws are forged alloy steel. They don't bend.
The claw hooks and claw frame are forged from high-strength alloy steel. Forging — not casting, not machining from bar stock — aligns the grain structure of the steel along the direction of loading, producing a claw that is significantly stronger and more resistant to deformation under load than either alternative. When you're pulling a seized 20-ton gear, a claw that bends is a claw that fails. These don't.

The oil return switch is new. It works better.
The updated oil return switch design on the YLX series provides cleaner, more controlled pressure release compared to earlier designs. Turn to release — the oil returns smoothly, the plunger retracts without sudden movement, and the component being extracted comes off in a controlled manner rather than dropping when pressure releases. For precision components where the extraction process matters as much as the result, controlled oil return is not a minor detail.

The handle grip is built for extended use.
The thickened rubber sleeve on the handle provides both grip security and vibration damping during pumping. When a 20 or 30-ton extraction requires sustained pumping effort, the handle quality directly affects operator fatigue. The textured rubber surface maintains grip with oily or wet hands — the conditions that exist on real job sites, not just in product photography.
Tonnage: 5T / 10T / 20T / 30T | Jaw Config: 2-jaw / 3-jaw interchangeable | Orientation: Horizontal & vertical | Pump: Integrated | Body: Integral forged | Claws: High-strength alloy steel forged