EZ-300/40 Cutting Crimping 2 in 1 Battery Electric Powered Hydraulic Tool 40mm Cable Cutter, China EZ-300/40 Cutting Crimping 2 in 1 Battery Electric Powered Hydraulic Tool 40mm Cable Cutter Manufacturers, Suppliers, Factory - Yuhuan Changyou Hydraulic Tools Co., Ltd.

1.350°Rotating clamp head The head can rotate freely at 350°,which is suitable for various angle operations

2.Hard and Sharp Blade C-type open clamp head,and the cutting surface is hard and sharp

3.One Key Control The operation is simple and convenient,one key can complete the operation.

4.One Key Reset When there is an error in the crimping process you can easily reset by pressing the trigger.

5.Battery upgrade to 5.0AH.Two batteries can work in turn.

Suitable for a variety of environments Commonly used in electric power,chemical industry,steel,machinery,industry and so on.

Model	EZ-40	Voltage	18V
Cutting Force	60 KN	Capacity	5.0Ah
Stroke	φ40mm	Charging time	2 hours
Cutting range	φ40mm armoured Cu/Al Cable、φ40mm ACSR
Cutting/Charge	130 Times per saturation voltage(Copper aluminum wire)
Cutting/Cycle	10-14 seconds(According to the diameter of the cable)
Accessories	Battery:2 pc,Charger:1 pc,Seals: 1 set

Model	EZ-300	Output	60KN
Stroke	17mm	Crimping range	16-300mm²
Battery voltage	18V	Battery capacity	5.0Ah
Charging time	2 hours	Weight	4.6Kg
Crimping times	320 times per saturation voltage(copper wire:150mm²)
Crimping time	3-6 seconds (according to the diameter of the cable)